Great penetrating power and compact size are achieved by the advanced 100kHz resonant mode high voltage transformer which delivers a constant DC output that easily outperforms contemporary 150kV cold cathode pulsed X-Ray generators. Depending on the detector used, the CP1201 will image through steel plates up to 10mm thick with a very short exposure time. The CP1201 can also be run continuously for several minutes without cooling interruptions, a major improvement on the "few seconds" possible with pulsed, cold cathode X-Ray units.

Main features:

• Constant potential output 120kV - 1mA
• 60?x 40?directional beam - 0.25mm x 0.5mm focal spot
• 6.5kg complete with battery pack and handling feature
• Extended operation, external power supply options
• Optimized for new digital and radiographic imaging media

Typical applications:

• NDT Inspection
• Bomb Detection
• Drug Search
• Customs Conrol

Voltage output type:
Constant Potential

Voltage output range:
60 to 120 kV

Current output:
1 mA

Max. Anode dissipation:
120 watts

Focal spot:
0.25 x 0.5 mm

Useful angle beam:
60?x 40?br>

Inherent filtration:
Equiv. 3.5mm Al

Internal power supply:
36 Vdc Ni-Cad

Working time till low battery:
6 min. at 20°C

Number of shots at full charge:
40 shots

Weight complete:
6.5kg

Tube head sizes only:
dia. 124mm x 440mm

Control & Settings

Overheating protection
X-Ray ON flashing light
Power ON/OFF key switch
Start/Stop buttons
Pre-warning time 2 or 5 seconds
30A fuse
Connector for remote operations
Time, kV, mA settings
Temperature, kV, mA, time displayed